Occupancy Sensor, Dual Relay, PIR, Wall Switch, 2100SF, 120-277V, White, USMCA Compliant, Decora®

ODS0D-INW

DISCONTINUED

AutoON/AutoOFF PIR Occupancy Sensor (ManualON/AutoOFF selectable), Vandal resistant PIR lens, Manual 2 Pole Wall Switches. Robust Dual Latching 10A Relays, No-Neutral wire required. Adjustable Service Switch: OFF/AUTO/ON (Keep in AUTO), 120/208/220/230/240/277VAC, 50/60hz, Field of View 2100 sq ft (Motion: Major 60'x40'; Minor 40'x20'), Dual Pyrometers for true 180 degree view with Blinders (32 degree block on each side). Adjustable time delay (in Adapting mode: 30s, 5/10/20m, Non-Adapting mode:...

UPC Code: 07847745252

Country of Origin : Mexico

Product Information

Updated

(se abre en una pestaña nueva)

Dual-Relay Decora Wall Switch PIR Occupancy Sensor(se abre en una pestaña nueva)

01/22/2024 View(se abre en una pestaña nueva)

Updated

Exclusive dual PIR design provides unmatched range and small motion detection.
Provides automatic switching for two separate banks of fluorescent, incandescent, or low-voltage lighting from a single unit. Ideal for classrooms, day care centers, offices, multimedia areas, conference rooms, lounges and other commercial areas.
Convenient dual push-buttons provide manual ON/OFF light switching of each load at any time.
Conference Room Mode—Primary and secondary relays switch lighting to last ON/OFF status when personnel enter room, providing a consistent lighting level from one occupancy period to the next. Both relays respond to Ambient Light Override, preventing lights from turning ON automatically during periods of ample natural light, for increased energy savings.
Class Room Mode—Both primary and secondary relays always switch lighting ON when personnel enter room, regardless of their ON/OFF status during last period of occupancy. Secondary relay only responds to Ambient Light Override—primary does not, ensuring that students and personnel never enter a darkened room.
Viewing Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF even if room is occupied.
Self-adjusting delayed-OFF time interval compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching.
Exclusive Walk-Through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy.
Non-Adaptive Mode disables Self-Adjusting Delayed-OFF Time and Walk-Through Feature in applications where these feature are not desired.
New, low-profile design eliminates obtrusive “scanning-device” look. Elegant styling complements any interior; uses Decora® brand wallplates and coordinates with Leviton’s popular line of Decora® brand wiring devices.
180° field-of-view provides approximately 2100 square feet of coverage, suitable for a variety of commercial areas.
Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive “small motion” area where even slight body movements will be detected.
Horizontal field of view may be adjusted between 180° and 32° arc by using integral blinders located on either side of the lens.
Optional manual adjustment for delayed-OFF time settings of 30 seconds (for walking test), 5 minutes, 10 minutes and 20 minutes. Allows customized adjustments to maximize energy savings.
Adjustable Ambient Light Override ranges from approximately 2 foot-candles (2 lux) to 500+ foot-candles (500+ lux).
Self-Adjusting Ambient Light Override compensates for changes in lighting requirements after override level has been set.
Manual-ON / Automatic-OFF mode for installations where manual ON switching is required but automatic OFF switching is still desired for energy savings.
LED indicator light flashes when sensor detects motion to verify detection is active.
Unit beeps 3 times after delayed-O FF time expires, then waits 10 seconds before turning lights OFF.
One unit can be used for either 120V or 277V lighting. Compatible with both electronic and magnetic ballasts.
Primary relay switches at the zero crossing point of the AC power curve to ensure longer contact life and compatibility with electronic ballasts.
Unit fits in standard single-gang wallbox and replaces two single-pole wall switches; ground connection required. Gangable with other devices.
CUL/US Certified, complies with California Title 24 Energy Code and FCC Regulations.
Limited Five-Year Warranty.

Welcome

Language

SOLUTIONS

SOLUTIONS

MARKETS

LITERATURE

PARTNERS

RESOURCES

COMPANY

Welcome

Language

Occupancy Sensor, Dual Relay, PIR, Wall Switch, 2100SF, 120-277V, White, USMCA Compliant, Decora®

ODS0D-INW

Product Information

Specifications

Resources

Features & Benefits

Related Videos