Integrated Fixture Control Solutions

Lighting Control Simplified

Leviton Integrated Fixture Mount/In-Fixture Controls offer a complete end-to-end professional lighting and wireless control solution. These streamlined solutions save time, money, and energy with easy installation and operation, easy energy savings, and out-of-the-box operation with no comissioning required. They offer less wiring for new construction and retrofits, and are easily programmed using an IR remote or a mobile app on a smart device.

High/Low Bay Fixture Mount Sensors

Leviton High/Low Bay Fixture Mount Sensors are designed for indoor and outdoor use with switching or 0-10V dimming ballasts/drivers. Use anywhere basic occupancy/ vacancy sensing is needed for auto-ON /auto-OFF or manual-ON / auto-OFF control.

Fixture Mount PIR Outdoor Sensor

Outdoor Passive Infrared (PIR) Occupancy Sensor lighting control to mount internal to task lighting fixtures, 360 degree high-bay lens (20-40’), 7.5” wire lead length, 120/208/220/230/240/277/347V.

Fixture Mount High/Low Bay PIR Sensor

Fixture Mount High/Low Bay PIR Sensor with time delay: 30s-30m, (2) interchangeable, adjustable 360° lenses.

Fixture Mount High Bay Wet Location Sensor

Fixture Mount IP65 PIR High Bay Wet Location Sensor. 360-degree low-bay (8FT-20FT), and high-bay (20FT-40FT) lenses, blue aisle mask.

Fixture Mount PIR Outdoor Sensor 24VDC

Outdoor PIR Occupancy Sensor designed to be mounted to internal to task lighting fixtures, 360 degree high bay lens (20'-40'), 24VDC, IP65.

High Frequency Microwave Occupancy Sensor

High Frequency Microwave Occupancy Sensor with 0-10V Dimming

High Frequency 0-10V Dimming Microwave Occupancy Sensor detects motion through low density materials, 120-277V.

High Bay Fixture Mount Occupancy Sensor with Photocell

High Bay Fixture Mount Microwave Occupancy Sensor with photocell. Adjustable via DIP switches on sensor or with optional IR remote.

Solo Sensors

Solo delivers a simple to install introduction to integrated fixture controls. When you need a straightforward solution for dimming, occupancy sensing and basic daylighting applications, choose Solo. Solo Sensors are easily configured using traditional dip switches or an optional IR remote control programmer for multi-level lighting control. Solo offers a self-contained solution that can be used to comply with IECC, ASHRAE 90.1 and 2022 Title 24, Part 6 occupancy sensing requirements.

Intellect Solo PIR and Daylight Harvesting Sensor

Intellect Solo PIR and Daylight Harvesting Sensor, fixture embedded. Requires 0-10V dim-to-off driver10-24VDC input voltage.

IR Remote

Optional Solo IR Remote for use with ZLS05.

Fixture Integrated Sensor

Sold through Leviton OEM. Solo fixture integrated sensor. 120-277VAC, 50/60Hz, controls 0-10VDC LED drivers or dimming ballasts.

Solo Fixture Integrated Sensor 12-24VDC

Sold through Leviton OEM. Solo PIR fixture integrated sensor. 12-24VDC, 0-10V, max 25mA sinking current.

Infrared IR Remote

Infrared (IR) remote for use with OSMHB-VDW, ZLS10-IDW, and ZLS10-ILW.

IP66 PIR Smart Integrated Fixture Mount Sensors

Designed for use with switching or 0-10V dimming drivers, these sensors feature multiple daylight modes as well as partial-OFF operation. Ideal for installations requiring energy code compliance. Configuration is made using the Leviton Smart Sensor App from a smartphone or Bluetooth-enabled Android or iOS device.

ZLD1Z-I0W

Sold through Leviton OEM, Dimming Internal Fixture Mount Daylight Harvesting PIR Occupancy Sensor. 120-277VAC 50/60 Hz.

ZLDUZ-I0W

Sold through Leviton OEM. Dimming Internal Fixture Mount Daylight Harvesting PIR Occupancy Sensor. Universal Voltage 120-480VAC.

OFD1Z-I0W

Dimming Internal End/Fixture Mount Daylight Harvesting PIR Occupancy Sensor. 120-277VAC 50/60 Hz.

OFDUZ-I0W

Dimming Internal End/Fixture Mount Daylight Harvesting PIR Occupancy Sensor. Universal Voltage 120-480VAC.

Intellect Wireless Components

When you need more advanced lighting control strategies, turn to Intellect Wireless. Engineered to simplify energy management and code compliance, controls are integrated into the fixtures and paired with a GreenMAX DRC Keypad Room Controller. All configurable with the GreenMAX DRC App. Virtually any fixture can be Intellect-enabled.

ZL027-ES

Emergency Sense Pigtail for use with Intellect Linear Power Control Module. Use the Linear Power Control Module (ZL027-DLE) as a UL924 emergency bypass device by connecting it to the Emergency Sense Pigtail (ZL027-0ES) with the cable provided.

ZL027-N0W

Power control module, DFC, 2.5a, Lumina RF 1-10V 10MA Sink Current. Nipple Mount.

ZL027-DLE

Intellect Power Control Module, DFC, 2.5A, 0-10V 10mA Sink Current. For use in linear fixtures. Requires use of compatible sensor head (ZL00J) and cable (ZLAEX) to form a complete solution.

ZL00J-D0W

DFC intelligent sensor for mounting in 1/2-3" rigid or flexible ceiling. Wireless interface. Requires DFC power pack. Provided with 18" pigtail. Requires DFC power control module for operation. White finish with white paintable trim ring.

ZL00J-T0W

Occupancy Sensor Head Module designed for double-d mounting directly into lighting fixtures for use in an Intellect-enabled Intelligent fixture.

ZL0DS-N00

Integrated Fixture Controller for mounting in 1/2” knock-out. Occupancy and light level sensor, 8-10’ mounting height. DALI output, DALI powered.

ZL07S-N00

Integrated Fixture Controller for mounting in 1/2” knock-out. Occupancy and light level sensor, 8-10’ mounting height. 0-10V Output.

ZL070-N00

Integrated Fixture Controller for mounting in 1/2” knock-out. No sensor, 0-10V Output.

ZL0D0-N00

Integrated Fixture Controller for mounting in 1/2” Knock-Out. No Sensor, DALI Output, DALI Powered.

ZL070-B00

Fixture Controller for mounting adjacent to driver in wiring compartment. No sensor, 0-10V Output. Aux port or external power supply.

ZL070-B20

Fixture Controller for mounting adjacent to driver in wiring compartment. No sensor, 2-Channel 0-10V Output. Aux port or external power supply.

ZL0D0-B00

Fixture Controller for mounting adjacent to driver in wiring compartment. No sensor, DALI output, DALI powered.

Leviton LED Lighting Fixtures

Leviton LED Lighting Fixtures are available in troffers and linears. These fixtures can be integrated with in-fixture controls such as Solo or Intellect Wireless. These integrated fixtures are ideal for retrofits and new construction by offering design build contractors an all-in-one solution that can be shipped directly to the job site saving on time, wiring, and energy.

ALRM LED Light Fixture

A Solo or Intellect-enabled chic Allura Moda features a slim profile and provided the optimal balance between uniform and glare-free task lighting.

(se abre en una pestaña nueva)

ALRA LED Light Fixture

A Solo or Intellect-enabled premium grade, pendant-mount, bi-directional luminaire with a slim profile to enhance the visual space.

(se abre en una pestaña nueva)

ALRB LED Light Fixture

A Solo or Intellect-enabled premium grade, pendant-mount, bi-directional luminaire featuring an architectural slim profile to enhance the visual space.

(se abre en una pestaña nueva)

LRTH LED Light Fixture

A Solo or Intellect-enabled commercial-grade, recessed, lay-in coffered t-bar troffer with modern styling and high visual comfort featuring a single shallow semi-round lens.