GreenMAX DRC | LED Controller | Lighting Control Systems

Confidently design and specify secure, simple and scalable distributed commercial fluorescent or LED lighting control systems with GreenMAX Distributed Room Controls (DRC) Wired or Wireless room controller/LED controller solutions. Our commercial lighting control systems allow for easy installation and operation while simplifying scalability for virtually any application. GreenMAX Distributed Room Controls (DRC) is a fluorescent or LED controller that integrates the Sapphire™ Touch Screen for a configurable user interface or GreenMAX Relay Lighting Control Panels for additional LED control capabilities. This will change the way you design commercial LED lighting control systems.

GreenMAX DRC Wired

GreenMAX DRC is fully encrypted, allowing for secure communication and control. Implement a plug-and-play, Category 6, RJ45 hardwired digital network or wireless mesh system. All fully configurable from the GreenMAX DRC App.

Wired Lighting Control

GreenMAX DRC Wireless

The GreenMAX DRC Wireless Keypad Room Controller brings Leviton wireless devices and Intellect™-enabled fluorescent or LED fixtures into the system. Add wireless load controls for switching, 0-10V dimming, and phase cut dimming as well as wireless occupancy sensors and wireless photocells. All fully configurable from the GreenMAX DRC App.

Wireless Lighting Control

Room Controller Devices for Wired Lighting Control Applications

GreenMAX DRC App

Commission, control and manage the GreenMAX DRC Room Control System from your smart device.

Line Voltage Room Controller 120-277VAC

GreenMAX DRC line voltage room controller with interface to LumaCAN, Lumina RF/ZigBee, and WiFi networks, 120-277VAC, 50/60Hz, 0-10V.

Line Voltage Room Controller 347VAC

GreenMAX DRC line voltage room controller with interface to LumaCAN, Lumina RF, ZigBee, and WiFi networks, 347VAC, 60Hz, 0-10V.

Low Voltage Room Controller

GreenMAX DRC low voltage room controller with interface to LumaCAN, ZigBee, and WiFi networks, DIN rail form factor.

Load Control Devices for Wired Lighting Control Applications

Smart Pack 120-277VAC

GreenMAX DRC smart pack, 0-10V, 120-277VAC, 50/60Hz, 20A max, 100mA sink current.

Smart Pack 347VAC

GreenMAX DRC smart pack, 0-10V, 347VAC, 60Hz, 12A max, 100mA sink current.

4 Channel Dimmer

GreenMAX DRC phase control DIN rail 4 channel dimmer, 2.5A per channel, 120-277VAC, 50-60Hz.

2 Channel Dimmer

GreenMAX DRC LumaCAN DIN rail 2 channel dimmer, 3.5A per channel, 120-277VAC, 50-60Hz.

Load Control Devices for Wired Lighting Control Applications Continued

Power Supply

GreenMAX DRC power supply, 120-277VAC, 500mA max power output.

DALI Interface

GreenMAX DRC DALI gateway LumaCAN to DALI interface with 2 full DALI channels to address up to 128 DALI devices. Allows DRC LumaCAN lighting control systems to control DALI fixtures.

Networking Devices for Wired Lighting Control Applications

Gateway

Luma-Net to LumaCAN NPC gateway.

Router

Unifi gateway router with gigabit ethernet.

Access Point

PoE access point, UniFi 802.11AC dual band.

Occupancy/Vacancy Sensors for Wired Lighting Control Applications

Digital Occupancy Sensor

GreenMAX DRC digital occupancy sensor and photocell, PIR, LumaCAN interface, 450sqft, white. For connection only to LumaCAN networks.

Analog Occupancy Sensors

Leviton offers a wide selection of occupancy sensors and vacancy sensors commonly referred to as motion sensors or motion detectors.

Analog Input Interface

GreenMAX DRC system, 2 analog input interface. LumaCAN protocol. DIN rail or surface mounting. Powered over LumaCAN, 12-24Vdc, 0.022+A.

User Interfaces for Wired Lighting Control Applications

Touch Screen Lighting Control

Sapphire 7" touch screen, capacitive interface, no faceplate included. NOTE: Control interface only. Requires load control device for dimming and/or switching.

Digital Keypads

Digital keypads. Permanently installed keypad user interface to the system; available in 1, 2, 4 and 8 button configurations.

Din Rail Enclosures for Wired Lighting Control Applications

Small Enclosure

DIN rail rack mount enclosure, small, 14" x 10" with (1) 12.9" (33cm) rail.

Medium Enclosure

DIN rail rack mount enclosure, medium, 21" x 25" with (3) 13.7" (35cm) rails.

Large Enclosure

DIN rail rack mount enclosure, large, 48" x 25" x 4" with (5) 19.5" (49cm) rails. CE and RCM listed. Configured solutions are available with pre-installed equipment.

Room Controller Devices for Wireless Lighting Control Applications

GreenMAX DRC App

Commission, control and manage the GreenMAX DRC lighting control system from your smart device.

Digital Keypads

Digital keypads. Permanently installed keypad user interface to the system; available in 1, 2, 4 and 8 button configurations.

Load Control Devices for Wireless Lighting Control Applications

Switching Power Pack

Wireless 20A on/off switching power pack on/off relay that can be used for plug load control, motor loads, or non-dimming luminaires.

Dimming Power Pack

Wireless 10A 0-10V dimming power pack can be used to dim any 0-10V controlled load.

Phase Cut Dimming Power Pack

Wireless 800W phase cut dimming power pack for dimming of full phase loads.

Wireless Wall Switch

Wireless Decora wall switch, 2.4 Zigbee, 120-277VAC, 50/60Hz, 10A Load.

Load Control Devices for Wireless Lighting Control Applications Continued

Wireless Wall Dimmer 120-277VAC

Wireless Decora 0-10V wall dimmer, 2.4GHz, 120-277VAC, 50/60Hz, 8A load, 0-10V sinking, 50mA. Available in white with color change kits available.

Wireless Wall Dimmer 347VAC

Wireless Decora 0-10V wall dimmer, 2.4GHz, 347VAC, 50/60Hz, 4A Load, 0-10V sinking, 50mA. Available in white with color change kits available.

Wireless Wall Dimmer 24VDC

Wireless Decora 0-10V low voltage wall dimmer, 2.4GHz, 24VDC, 0-10V sinking, 20mA. Color: white, light almond, ivory.

Wireless Controlled Receptacle

Wireless controlled receptacle works in conjunction with a Leviton wireless room controller or Zigbee 3.0 compatible hub, gateway, or controller.

Occupancy/Vacancy Sensors for Wireless Lighting Control Applications

Wireless PIR Occupancy Sensor and Photocell

Zigbee wireless PIR occupancy sensor and photocell, 1500 sq. ft.

Leviton LED Lighting Fixtures

Leviton LED Lighting Fixtures are available in troffers and linears. These fixtures can be integrated with in-fixture controls such as Solo or Intellect Wireless. These integrated fixtures are ideal for retrofits and new construction by offering design build contractors an all-in-one solution that can be shipped directly to the job site saving on time, wiring, and energy.

ALRM LED Light Fixture

A Solo or Intellect-enabled chic Allura Moda features a slim profile and provided the optimal balance between uniform and glare-free task lighting.

(se abre en una pestaña nueva)

ALRA LED Light Fixture

A Solo or Intellect-enabled premium grade, pendant-mount, bi-directional luminaire with a slim profile to enhance the visual space.

(se abre en una pestaña nueva)

ALRB LED Light Fixture

A Solo or Intellect-enabled premium grade, pendant-mount, bi-directional luminaire featuring an architectural slim profile to enhance the visual space.

(se abre en una pestaña nueva)

LRTH LED Light Fixture

A Solo or Intellect-enabled commercial-grade, recessed, lay-in coffered t-bar troffer with modern styling and high visual comfort featuring a single shallow semi-round lens.

(se abre en una pestaña nueva)

LCOMN LED Light Fixture

A Solo or Intellect-enabled premium-grade LED slim profile linear luminaire. Comes with a lay-in frosted lens that offers visual comfort.

(se abre en una pestaña nueva)

LMEZ LED Light Fixture

A Solo or Intellect-enabled premium-grade LED slim profile linear luminaire. Comes with a lay-in frosted lens that offers visual comfort.

(se abre en una pestaña nueva)

JAKE LED Light Fixture

Minimal aperture recessed linear fixtures offering Trim (TR) or trim-less (TL) mounting in t-grid or drywall. Suitable for transverse mounting as ceiling to wall, wall to ceiling.

(se abre en una pestaña nueva)

SS4G4DR LED Light Fixture

4" LED round downlight Intellect-enabled option available.

(se abre en una pestaña nueva)

Frequently Asked Questions

Simple control of shades can use the 0-10V Smart Pack to trigger contact closure input of a shade control system indicating open/close or preset status. Other more advanced methods using multiple contact closures, alternate forms of signals or direct Mechoshade interface can be provided as needed. Contact Leviton Controls Quotations to facilitate a system design.

GreenMAX Relay Panels can be used in a GreenMAX DRC Room Control System. Note that those Relays, when configuring, will be put in a behavior that tells the panel to do nothing with them other than let them be controlled from across the network. The GreenMAX DRC Room Controllers will be in charge of those relays and the NPU will just ignore them. The Relays will look like Smart Packs to the GreenMAX DRC system.

Yes; however, they are independent systems. A GreenMAX HDU will be used to program the GreenMAX Relay Panel and the GreenMAX DRC App to program the GreenMAX DRC Room Control System. Even if they are on the same LumaCAN cable, they operate as two independent systems. GreenMAX is commonly used for panel scheduling for applications such as landscaping and hallway lighting, and GreenMAX DRC is used for rooms that don’t have crossover with the other applications.

This works best when each controller is fully in charge of its own applications and they do not co-mingle, which becomes confusing. Note that there is no particular benefit to running GreenMAX and GreenMAX DRC on the same LumaCAN network, except in the case of having a Sapphire Touchscreen front-end controlling the entire building.

BACnet is used for control from BMS and LumaGraphics interfaces. The NP00G is the BACnet interface for the GreenMAX DRC Room Control System, which is a LumaCAN to BACnet interface. Add that solution to the network, and then the system has an IP connection going out to the BACnet network. The system shows up to the BACnet network with every load (sensor/button) as an analog input that gets full exposure to the network. Every group of 250 LumaCAN nodes has a BACnet interface to the system.

As a general rule, no. It results in negative performance for all systems as a result of having two WiFi networks in a facility. It is a standard Ethernet and WiFi best practice to create segmented networks. For example, in facilities that offer guest WiFi access. Every time you log in to that guest network, it forms a network that is separate from every other guest network in a building. Users cannot see or talk to one another, but they are on the same WiFi system.